Jacobus Thomson Fecit 18th Century 11" Brass dial. Matted center, ringed holes, square calendar aperture . One mount pillar pin hole broken, see the pic. This is a very old dial in pretty good shape. The one mount pillar has broken from a pin being inserted too strongly but is easily repairable. The dial most probably is prior to c1720. I am unable to determine maker's city and time.

Nice English Break Arch Longcase Moondial 18.5x13 inch. Silvered un-signed dial with seconds dial plus date ring. The dial portion is 13x13 inches. The break arch from top center to bottom of dial is 18.5 inches. The chapter ring has arabic numeras. The moon dial figures work. All behind the dial motion work is complete.

Vienna Dial 8.25 in (21 mm) across bezel edge to bezel edge. Nice porcelain dial with seconds bit. 2 1/8 inch (5.5 mm) between wind holes. Note the two missing posts on back. Suppliers have dial feet and the zinc plate on back is removeable to install new dial feet (or even move them to fit another movement). This dial will work with the movement item "vienna_4" on this site. This dials bezel needs to be cleaned and has some corrosive brass areas.

Vienna Dial 7.25 in across bezel edge to bezel edge. Nice porcelain dial. 1 11/16 inch between wind holes. This dial will work perfectly with the movement item "vienna_3" on this site.

Gustav Becker 2-wt dial 81/8 inches Fleur-des-les with second bit and GB anchor and crown logo. This is a georgeous dial. 21/8 inch between wind holes, 1 3/16 inch from 2nd bit to center hole center to center

3-weight Vienna Regulator dial 7.25 inches. 3 3/4 in between left and right wind holes. 1 inch between center hole and time wind. Some hairline cracks. Chip missing between 7 and 8. Still very serviceable.

3-weight Vienna Regulator dial 7.25 inches. 3 9/16 inch (9cm) between left and right wind holes center to center, and 1 inch (2.5cm) between center hole and time wind hole. 2 hairline cracks between 8 & 9. Nice dial.

3-weight Vienna Regulator dial 7 5/16 inches. 3 3/4 in between left and right wind holes. 1 inch between center hole and time wind. Some hairline cracks. Chip missing between 4 and 5. Another chip on center insert.

Vienna 2-wt dial Celluloid 7 1/4 inch. 2 1/4 inches between wind holes center to center

2 - wt vienna porcelain dial. Arabic numerals fancy brass center, no bezel, Excellent chapter ring 7 1/4 inch, 1 7/8 inches between wind holes center to center.

Vienna style dial 2-wind fancy brass arabic numerals, 7 1/4 inch, 2 inches between wind holes center to center.

Double Fusee convex painted bracket clock dial. 7 7/8 inch, 3 dial feet. 1 1/16 inches between centers from center hole
to wind holes and 2 3/16 inches between centers of wind holes.

to wind

Single fusee silvered convex dial. 6 inch "Made in TameSide England". Dial mounts direct to case
1 1/4 inch between centers.

Single Fusee Porcelain Dial 8 3/16 inch, Signed Vickarys & Robertson Exeter. Mount is direct to case.

Vienna 1-wt porcelain dial. 8 inch, nice bezel, hairline cracks.

Vienna 1-wt Dial with 2nd bit. 8 1/4 inch, hairline cracks, chip above 2nd bit

Vienna 1-wt dial Arabic Numerals. 7 1/4 inch no bezel, arabic numerals, no cracks