Nice 3 weight Vienna regulator movement. The movement is in running order. This movement is for the old style wood mount with two slotted back boards. Pendulum is suspended from case. I will include the temporary mount boards shown as well as the brass pendulum suspension to affix to back of case. The movement is unsigned.

Vienna 3-weight movement. Maker unknown with serial number 10798. Movement is complete and runs. It has a slotted back for a 4 pillar mount. Please note the punched plate on the center wind. Also the chime block has a crack on the right screw hole.

Vienna two weight Remember movement. Back plate has the Remember logo of Resch-Gebrueder Co. Movement ticks and strikes the gong when pressure is applied to the great wheels, so it is all there. In addition to the makers logo, there are two numbers on the back plate. 100000 with 98544 under. The movement needs to be disassembled, cleaned and oiled, and some surface rust removed, then restrung. The movement is mounted to the case via the 4 slots in the back plate having the following measurements: distance between upper slots approx. 6.3mm, distance lower slots 5.7mm and distance top to bottom slots is 7.3mm. All distances measured to center of round portion of slot.

I do not have a mount bracket to match but with a WW lathe they are easy to make. I do however have a dial that will work, though not original to the movement as I found them. See Store item under "Dials" item "dial_5".

A nice two weight Vienna movement. Back plate has the RG logo Crown with anchor below and an oval inscribed Freiburg Schlesien. Also the serial number 216220. From the pics you will see that someone has soldered an extension on the strike arbor behind the plate for some obscure reason probably strike/silent. This can be easily removed.

Thanks to the late Doug Stevenson for the following historical identification.
"The trademark with "RG" belonged to the Regulateur-Fabrik Germania, in Freiburg/Schlesien. Also known as the Regulateur-Uhren-Fabrik Germania, it was founded by former Gustav Becker workers in 1871, and was one of the so-called Freiburger regulator factories which merged in 1899 to form VFU/GB." Thanks Duck!

The movement needs to be cleaned and restrung. The movement mounts to the case using a vienna bracket such as the one listed on this site as item "part_1" under "clock Parts". The bracket plate affixes to the bottom movement posts having a distance between post holes approx. 9.2 mm.

A nice dial for this movement is available under "dials" item "dial_4".

Furtwangler & Sons (Furtwangler-Soehne ) 1-wt vienna style movement. Complete with bracket, porcelain dial, hands, seconds bit, gut line and pulley. I also have the weight that came with it. I found this movement and dial back in the 1980's on the West Coast of Ireland. The serial number is 89396. I can add a proper weight to go with it for $25.

Vienna style 1- weight Remember movement. Back plate has the Remember logo of Resch-Gebrueder Co. Both movement front and backplates and the bracket bear the serial number 66464.

Gustav Becker 2-wt movement Serial number 255371, Medaille D'OR plus GB Anchor Freiburg in Schl. logos. This movement has been mounted on a Spring Regulator bracket which should be removed. I found it this way and I will ship it unless the buyer wants it removed.